Drain Services tips to resolve those clogged drains
Drain Services tips to resolve that clogged sewers issue
Do you know what the best way to unblock waste pipes is? Using a plunger is the most effective and quickest way to solve this common household problem unless you employ a Drain Services company. What’s involved is very clear, cover the drain with the plunger and push. But the last thing you want to do is be too aggressive and pulse to quickly. The most effective procedure to adopt is to cover the drain completely with the bell-shaped head of the plunger and push down gently, then come up quickly and forcefully creating suction. A minor blockage can be pulled up and out of the sink or drainpipe through the sucking action of the plunger. Some tubs and sinks have an over spill outlet; remember to plug this outlet with the help of a wet towel or sponge before using the plunger.
The other alternative to using a Drain Services company or your drains plunger is to use a commercial product that uses chemicals to loosen the blockage, such as caustic soda. These products should be used only when the plunger has failed to clean out your bathroom drain. The chemicals must sit for a while as it eats away at the blockage, then you must run hot water down the drain to flush it out. During the cleaning operation, chemicals and dirt may spill over your clothes, therefore as a precaution wear old clothes. At this point many people call in a Drain Services contractor. If you plan to use the plunger after the application of chemical to remove the remaining debris, then eye protection is essential because the chemical laden water may back-splash on you and burn. To avoid unwarranted problems from creeping up, follow the manufacturers instructions ardently.
If the plunger still doesn’t make any difference after the chemical treatment you could use pliers or a pipe wrench to loosen the P-trap nuts. Removing the drainage trap can release a sudden rush of waste water, so keep a mop and pail handy, put a bucket underneath the p-trap before you disconnect it. By covering the jaws of your wrench with electrical tape you will avoid damaging the chrome on your pipes and it will also allow you to get a better purchase of them. After disassembling the P-trap, examine the trap for anything blocking the mouth of the pipe. But in case you are unable to find any blockage, chances are that the problem lies deep down between the soil stack and the trap and you will need additional tools or a trusted Drain Services company.
To unclog the toilet, you should use a toilet auger to get at these deep seated stoppages. If on the other hand you are attempting to unclog your tub or sink you may need to use a drain pipe snake. The flexible snake wire can be inserted deep into pipework of smaller diameter. With the help of the adjustable handle, you can literally drill into the blockage and pull out the clog from the drainpipe. The P-trap should be reconnected once the obstruction is cleared, slowly flush the drain with hot water to confirm that there is no obstruction and that there are no leaks. Finally, you should double check that everything is sealed properly, tightly screwed into place and make sure that the P-trap does not have any leaks.
If none of the steps you have taken work, it is time to bring in a local Drain Services crew or a professional plumber. You will need to call a professional plumber or expert Drain Services when the clog is in the sewer or soil track or when it is due to tree roots, or when the pipe has collapsed due to some reason.