Clear out those clogged waste pipes speedily
Clear out those clogged waste pipes speedily
What comes to mind quickly when faced with obstructed waste pipes in your bathroom? The simplest one is to use the good old plunger. Using a plunger is very simple if you know how. But you should avoid applying unnecessarily too much force to the plunger when pulsating it up and down. To ensure that the plunger works effectively, wholly cover the drainage with its bell-shaped head, and gently push it down once, and immediately come up, so that suction is created. A minor clog can be pulled up and out of the sink or drainage through the sucking action of the plunger. Note that some tubs and sinks are fitted with overspill holes that must be closed with a sponge or wet towel before proceeding with the plunger.
You could use a drains clearance chemical that is designed to break down the material instead of the more conventional plunger. These products should be used only when the plunger has failed to clean out your bathroom drainpipe. You should allow the chemicals time to take effect and then, once the material that is clogging the drainpipe has been disintegrated you can flush it out with hot water. As a precaution you should wear clothing that you don’t mind getting dirty or corrosive chemicals on. Putting on eye cover will be a good idea if you intend to plunge again and prevent the splattering of left over chemicals into your eye. To avoid unwarranted problems from creeping up, follow the manufacturers instructions ardently.
The next thing you can attempt to use if your plunger is unproductive is to loosen the nuts holding the P-trap in place with pliers or a pipe wrench. Now, this process can be really messy, so keep the towel and bucket handy. Use an electrical tape to encircle the jaws of your wrench so that you can get a better grip on the pipes and also maintain their chrome finish without scratching them. After you have removed the P-trap, clean it thoroughly to eradicate any solid material that may be blocking the pipe opening. But in case you are unable to find any blockage, chances are that the problem lies deep down between the soil stack and the trap and you will need additional tools.
If you are trying to unclog your toilet you can use a toilet auger. If the problem lies in your tub or sink, a plumbers drain snake will come in handy. drainage snakes are manufactured to be able to access the far side of your pipes as narrow as they may be. A plumbers drainpipe snake has an adjustable handle which is used to make a drill into the clog, it then becomes easy to remove the obstruction by pulling it upwards. After removing the blockage, reassemble the P-trap and let hot water flow into the drainpipe to double check it works properly. Everything should be sealed properly after the whole process is over, the P-trap and pipes should also be checked for any leaks.
You need to take professional drains pipes clearance help in case you are unable to unclog the drain pipe by any of these methods. Some common problems that are beyond the capabilities of the common homeowner are blockages in the soil stack or the sewer service by tree roots or even a collapsed pipe which could be the result of old age or deterioration of the pipes because of Mother Nature or an unforeseen Act of God.